|
Typical Technical Properties
Brought
to you by Detroit, Michigan Truck and Automotive Engineers and
Lubrication Specialists. We have 23 years experience
engineering cars and trucks right here in the heart of the car
and truck engineering and manufacturing capital of the world
and we will put our extensive knowledge to use for you.
We
are also longstanding Professional Grade members of the
Society of Automotive Engineers (SAE). This prestigious
position is ONLY granted to degreed engineers with
documented work experience in the automotive engineering
industry.
We
have packed this website with useful information that will
help you to make an informed decision regarding your choice of
lubrication and filtration products for your vehicles and
equipment.
Typical Technical Properties
Relevant ASTM test results
are reported on AMSOIL product data bulletins as
"TYPICAL TECHNICAL PROPERTIES." Here is a
guide to typical technical properties for AMSOIL motor
oils.
The ASTM (American Society for Testing
and Materials), founded in 1898, is a scientific and
technical organization formed for the development of
standards on characteristics and performance of
materials and services.
ASTM is the world's largest source of
voluntary consensus standards.
ASTM operates through a system of
committees and subcommittees. Its committees
function in prescribed fields under regulations that
ensure balanced representation among producers, users,
general interest and consumer participants.
ASTM standards govern the majority of
testing performed on motor oils in North America.
KINEMATIC
VISCOSITY
Test
Number & Name: ASTM D-445 Standard Test
Method for Kinematic Viscosity of Transparent and
Opaque Liquids
Significance & Use:
The proper operation of equipment depends on the
proper kinematic viscosity at operating temperature of
the oil used for its lubrication.
What it means: Kinematic
viscosity is a measure of a liquid's flow under the
influence of gravity. It's handy to think of a
lubricant's kinematic viscosity as its "I.D.
card." AMSOIL formulates its synthetic
lubricants to tighter viscosity limits than other
manufacturers do, so AMSOIL synthetic lubricants'
kinematic viscosities are midrange, close to neither
the high or the low limit. That helps components
work their best and helps the lubricants stay in
grade.
VISCOSITY
INDEX
Test Number and
Name: ASTM D-2270 Standard Practice for
Calculating Viscosity Index from Kinematic Viscosity
at 40 deg. C. and 100 deg. C.
Significance &
Use: Viscosity index indicates how much of a
lubricant's viscosity will change according to changes
in temperature between 40 deg. C (104 deg. F) and 100
deg. C (212 deg. F), which roughly define the normal
temperature range of most operations.
What it means:
The smaller a lubricant's viscosity as a result of
temperature change, the higher that lubricant's
viscosity index. High viscosity index
lubricants, such as AMSOIL products, protect better in
operations with temperature variations.
COLD
CRANK SIMULATOR APPARENT VISCOSITY
Test Number & Name: ASTM
D-2602 Standard Test Method for Apparent Viscosity of
Engine Oils at Low Temperature Using the Cold-Cranking
Simulator
Significance & Use: Apparent
viscosity has been established as a valid predictor of
engine-cranking viscosities at specified low
temperatures. Apparent viscosity depends on
temperature and shear rate.
What it means: Cold
cranking viscosity affects the startability of engines
and other equipment in cold temperatures. Low
cold cranking viscosities, such as those of AMSOIL
synthetic lubricants, make for easier cold cranking
and more dependable cold temperature starting.
BORDERLINE
PUMPING TEMPERATURE
Test
Number & Name: ASTM D-3829
Standard Test Method for Predicting the Borderline
Pumping Temperature of Engine Oil.
Significance
& Use: Borderline pumping temperature is
a measure of the lowest temperature at which an engine
oil can be continuously and adequately supplied to the
components of an automotive engine.
What
it means: The lower the borderline
pumping temperature, the lower the temperature
at which the engine is protected by circulating
oil. AMSOIL synthetic motor oils' extremely low
borderline pumping temperatures assure excellent low
temperature protection.
POUR
POINT
Test Number & Name:
ASTM D-97 Standard Test Method for Pour Point of
Petroleum Oils
Significance and Use:
The test determines the lowest temperature at which an
oil flows as the jar is tilted for a prescribed
period. The pour point of an oil indicates the
lowest temperature at which an oil may be used in some
applications.
What it means: The lower
the pour point, the more useful the lubricant is in
cold temperatures. AMSOIL synthetic lubricants
offer exceptionally low pour points.
FLASH
AND FIRE POINTS
Test Number & Name:
ASTM D-92 Standard Test Method for Flash and Fire
Points by Cleveland Open Cup.
Significance & Use:
Flash point is the lowest temperature at which
application of a flame causes specimen vapors to
ignite. Flash point is used to assess the
overall hazard of a material and is used in shipping
and safety regulations to define "flammable"
and "combustible" materials.
Fire point is the lowest temperature
at which a specimen sustains burning for five seconds.
What it means: Lubricants
with high flash and fire points, such as AMSOIL
synthetic lubricants, are safer to use and transport
than lubricants with lower ones and have a greater
high temperature operating range.
NOACK
VOLATILITY
Test
Number & Name: ASTM D-5800 Determining
the Evaporation Loss of Lubricating Oils (Noack's
Method)
Significance
& Use: Test determines the evaporation
loss of lubricating oils at high temperature.
Evaporation loss is particularly important to motor
and cylinder lubrication, due to the high temperature
of these operations and the tendency of evaporative
loss to increase in high temperatures. Significant
evaporative loss of oil leads to excessive oil
consumption and destructive changes in oil properties.
What
it means: Lubricants with low Noack
scores, such as AMSOIL synthetic lubricants, lose less
to volatility than lubricants with higher
scores. Low-loss oil keep their original
protective and performance qualities longer than
high-loss oils do, which keeps oil consumption low and
fuel economy and equipment protection high.
HIGH
TEMPERATURE/HIGH SHEAR VISCOSITY
Test Number & Name:
ASTM D-4683 Standard Test Method for Measuring
Viscosity at High Temperature and High Shear Rate by
Tapered Bearing Simulator
Significance & Use:
Viscosity at the shear rate and temperature of this
test is considered representative of the condition
encountered in the bearings of automotive engines in
severe service. Lubricant viscosity in the
bearings of automotive engines in severe service is a
critical factor in bearing wear.
What it means: Lubricants
with high scores, such as AMSOIL synthetic lubricants,
maintain their viscosity in high temperatures after
exposure to high shear. That means they continue
to protect engine bearings even after exposure to
severe service conditions.
FOUR
BALL WEAR TEST
Test Number & Name: ASTM
D-4172B Standard Test Method for Wear Preventive
Characteristics of Lubricating Fluid (Four-Ball
Method)
Significance &
Use: Test method determines the
relative wear preventive properties of lubricants in
sliding contact under the test conditions.
Lubricant comparisons are made by comparing the
average wear scars on three fixed balls made by one
ball in rotating contact with them in baths of the
test lubricants.
What it means: The smaller the
average wear scar, the better the protection.
AMSOIL synthetic lubricants deliver much smaller wear
scars- and much better protection- than other
lubricants do.
The Four Ball Wear Test may be
conducted at various levels of severity.
Independent laboratory testing shows AMSOIL Series
2000 and Series 3000 motor oils' wear scars are
significantly smaller than those of popular competitor
oils in extremely severe test conditions, making these
oils ideal for extreme service operations.
Summary: Compare AMSOIL's
synthetic lubricants technical properties with those
of ANY other motor oil and you'll see exactly why we
say....when you compare, there is simply no
comparison. AMSOIL out performs them every time.
AMSOIL
is the undisputed leader in synthetics.............
AMSOIL
Synthetic Lubricants meet and far exceed ALL
manufacturer and API specifications.
With AMSOIL, you are using a superior product to ANY
manufacturer branded, or any other brand of lubricant.
We have documented and certified independent ASTM
and SAE test data to prove it, along with 35
years of world class performance and hundreds of millions of miles of on-the-road testing.

Since
1972, AMSOIL
Synthetics have proven to be the BEST.
AMSOIL also engineers and manufactures Ea Oil
Filters with Nanofiber Technology which have a 25,000 mile/1-year service life as well as
specialized filtration systems for commercial and fleet
applications in cars and light, medium and heavy trucks which
can filter particles down to less than one micron (a standard
full flow oil filter can only filter to 20-25 microns, and at
a reduced efficiency) making oil changes virtually
unnecessary and virtually eliminating engine wear.
These filters have been proven by millions of miles of
over-the road trucks, construction equipment and fleet
service.
- AMSOIL
saves you time and money.
- The
only 25,000 mile/one- year and 35,000/one- year motor oil
in the world.
- Exceeds
the most stringent performance specifications of all major
U.S. and foreign automotive and truck manufacturers.
- Provides up to five-times the wear protection of other motor oils.
- Increases
the life of your vehicle.
- Improves
performance, fuel economy and efficiency.
- Diesel
oil and filtration products designed to deliver 1,000,000
miles for over-the-road trucks before engine overhaul.
- Used
by many national racing teams, fleets, police departments,
construction firms and trucking companies.
Performance
Oil Technology is a skilled team of Engineers and Lubrication
and Filtration Specialists led by Dave Mann. Mr. Mann is an
AMSOIL Regency Platinum Six Star Direct Jobber, Detroit MI Truck/Automotive Engineer
and Lubrication Specialist with over 23years experience.
Direct Jobber Dave Mann Makes AMSOIL History
You too, can join our group
when you become an
AMSOIL
Dealer or Preferred Customer and take advantage of all that we offer as you
use products in your own vehicles or begin your own AMSOIL
business. Or you can simply purchase AMSOIL products at
wholesale prices with our Preferred Customer option. You won't find a more knowledgeable and skilled
group of Dealers anywhere which is very important when you
need support as use products and/or build your business.
In
addition, as a Dealer in our group you will receive exclusive
unlimited product, technical and business support from the
only group of Truck and Automotive Engineers and Lubrication
Specialists on the net.
We
do not only run our business on the internet. We also have
numerous commercial, industrial, trucking, excavating,
construction, logging, police, racing and many more accounts
that we support and service on a regular basis. We have
several fully stocked warehouses and fully equipped shop
facilities. This provides us with excellent knowledge of the
products, equipment and the business and the ability to respond
immediately to any of your needs. We will use this
knowledge and experience to help you get started so you too
can achieve your goals.
We
possess the skills, desire and knowledge to answer
questions, solve problems, improve efficiency, reduce
downtime, maintenance costs and increase the durability and
life of all of your vehicles. We are based out of
Wolverine Lake/Walled Lake, Mi and Traverse City, MI and do
business nationwide and in Canada.
Read what our
satisfied
customers have to say about us. Read through our
website. Contact us with any questions. If you decide to
become an AMSOIL Dealer you will be joining, in our
opinion, the most skilled AMSOIL group there is. We will help
you get started and provide you with the tools and information
in order to be successful in this business or with
technical and product assistance to use AMSOIL products in
your own vehicles.
If
you would like a FREE comprehensive packet of technical,
information, catalogs, specifications, retail and wholesale
prices, dealer application and other crucial information
regarding AMSOIL Ultra Premium Synthetic Motor Oils and
Filtration Products plus much, much more please e-mail us at dave@performanceoiltechnology.com
with your postal mailing address and your packet will be
shipped promptly. Your name and address will be held strictly
confidential.
Also,
please inform us of any special interests you have (diesel,
motorcycle, racing, etc.) so that we can include additional
material pertaining to your special interests and vehicles.
AMSOIL
is Proudly Made in the U.S.A. AMSOIL
is America's Oil.
|
ASTM Comparative Motor Oil Testing
See Who
Came Out on Top!
AMSOIL 10W-30, Mobil 1 Extended
Performance, Quaker State
Advanced Full Synthetic, Penzoil
Platinum, Trop Arctic,
Motorcraft, Castrol GTX, Chevron
Supreme, Havoline, Formula
Shell, Penzoil
|
|
AMSOIL Dealership and
Preferred Customer Wholesale
Pricing Information
-
Minimal Dealership start-up fee ($15
for 6-months, $30 for 1-year))
-
$10 for 6-months
Preferred Customer Membership
-
Premium Quality Product
Line
-
No inventory requirements
or territory restrictions
-
No capital investment
-
No employee expenses or
requirements
-
You choose your level of
time investment
-
Excellent tax benefits
-
Exclusive Dealership Internet Promotional
Package to help get you started and keep you up to date.
-
Expert assistance from
your sponsor, a Detroit Michigan Lubrication Specialist & Automotive Engineer with
22
years experience.
Use the form below to get complete product/ technical and
Dealership/Preferred Customer information and to find
out how you can get a large discount on all your AMSOIL purchases while
building a stable and solid business.
|
Customer Sold on AMSOIL Quality
and Value.
That's what today's savvy consumers want.
According to marketing analysts, the average
consumer no longer accepts general sales pitches
full of empty promises. The Internet gives consumers
instant access to nearly every possible product or
service. They look for quality information, conduct
price comparisons and then make buying decisions.
The bottom line: more bang for their buck. And when
that consumer is raising seven children, top quality
products and savings are an even greater priority.
Scott Boring, Oakfield, N.Y., has seven children
with his wife Teri. He's looking for quality and
savings to keep his 1997 GMC Yukon, with a 5.7 litre
V-8 engine that "isn't noted for gas mileage,"
running down the road carrying his large family as
efficiently as possible.
A friend told Boring about AMSOIL products. He
promised better gas mileage - an important selling
point with today's high gasoline prices - more
efficient performance and longer life.
The vehicle had 40,000 miles on it when Boring
installed AMSOIL products bumper to bumper.
"I did it all at one time, just to see the
difference," Boring said. He installed
AMSOIL Severe Gear 75W-140 Synthetic Gear Oil, used AMSOIL Engine
Flush and then installed AMSOIL 10W-40 Synthetic
High Performance Motor Oil and AMSOIL Universal
Automatic Transmission Fluid.
"I especially like the ATF," Boring said. "The truck
shifts smoother and the transmission is quiet. All
you hear is the tires on the ground. I've tried
other synthetics, lots of them. I just never saw any
difference. But, with AMSOIL, I saw a difference
right away."
The first tankful of gasoline increased his mileage
from 15 mpg to 20.5 mpg. "I swear I didn't believe
it," he said. "I'm averaging between 19 and 21 mpg
all the time.
"This stuff is awesome and I'm letting all my
friends know about it."
AMSOIL Customers Appreciate Greater MPG
Although results vary because of a variety of factors, a common
denominator among AMSOIL motor oil users is an improvement in fuel
economy.
Independent testing reveals that AMSOIL Signature Series 0W-30 motor oil
passes the API Energy Conservation Sequence VI test with a rating 38
percent higher than the API minimum specifications.
"The test results show that AMSOIL has the potential to save energy by
conserving fuel," said Technical Services Manager Ed Kellerman. "In most
cases it can increase mileage, but at the very least you're getting
superior engine protection."
Ralph Sites, a police officer in Rustburg, VA, said he put AMSOIL 10W-40
Synthetic Motorcycle Oil in his 2002 GL 1800 Honda Gold Wing when it had
4,550 miles on the engine.
"I had been getting 30 miles per gallon," Sites said. "I was supposed to
be getting 40 to 45 miles per gallon."
His first oil change to AMSOIL improved his mileage to 38 miles per
gallon. At 6,500 miles on the engine, after replacing the final drive
oil with AMSOIL Severe Gear 75W-90 Gear Lube, he improved to 40 miles
per gallon.
"I switched to AMSOIL for the long-term gain. The improved gas mileage
was just a bonus. AMSOIL is less expensive than Honda's synthetic and I
don't have to change it as often. It's a win-win situation."
He bought the bike new in January 2002 and had put 12,000 miles on it in
August. He said the improved mileage he's gotten since switching to
AMSOIL has saved him $102 just in gasoline.
Jeff Bailey in Fulton, Mo., said his 1996 Lexus GS300 with 81,000
miles on it also gained fuel efficiency when he switched to AMSOIL
motor oil.
"The car wants premium gasoline," he said. "I drive about 18,000 miles a
year. I ordered your synthetic product and absolutely astounded.
"I was used to getting about 20 mpg overall and having a little low-rev
torque."
Since switching to AMSOIL motor oil, Bailey gets 24 mpg and uses regular
gasoline.
"The engine feels even more flexible," he said. "I've used AMSOIL now
for my wife's anemic Camry 2.2 litre and have calculated that I have
saved about $120," he said. "Thanks AMSOIL for an awesome product. You
have a customer for life."
Likewise, Lance Okeson of St. Paul, Minn., gained miles per gallon after
switching to AMSOIL motor oil in his 1995 Cutlass Supreme.
Okeson made the switch after learning about AMSOIL from a customer of
his at a quick lube where he works. His customer was so enthusiastic
about AMSOIL, Okeson did some research on the AMSOIL Website and decided
to try the products. A trip from the Twin Cities to Fargo, N.D., in a
steady 17 mile-per-hour wind, and back showed him an increase from 24
mpg to 30.5 mpg.
"I have never gotten 30 plus mpg with that car," Okeson said. "I have
two other vehicles that I switched over to AMSOIL motor oil. One is a
4x4 and the other is an old muscle car. I switched the transmissions and
the differentials in those vehicles as well."
ASE Master Technician Sold on
AMSOIL
Mark Deschner, Friendswood, Texas,
is an ASE Master Technician and Manager of the West
Pear Land Tire & Auto Store.
He recently was able to demonstrate the superior
quality of AMSOIL Synthetic Lubricants when he had
to change out a leaking intake manifold on his 1991
Chevrolet 1/2 ton pickup truck, with more than
183,000 miles on the original engine.
"When my lead technician took the intake manifold
off, for the first time ever, he couldn't believe
how clean the lifter valley and the top of the
cylinder heads were on my truck," Deschner said.
The technician thought Deschner may have changed it
before. But Deschner assured him he had never had
the intake off before.
"He always made fun of me for only changing the oil
once a year and the filter twice a year," Deschner
said. "I think that seeing how clean the intake and
cylinder heads are in my truck has changed his mind
about AMSOIL products. I've always believed in them
and my truck runs AMSOIL for all lubricant needs."
He uses AMSOIL 10W-40 Synthetic Motor Oil,
EAO24
Absolute Efficiency Oil Filter, TS31 2-Stage Air Filter,
GF111 Fuel Filter, 80W-90 Synthetic Gear Lube,
Universal Automatic Transmission Fluid, Synthetic
Multi-purpose Grease, P.I. Performance Gas Additive,
Rain Clear Windshield Protectant and Bosch
windshield wiper blades.
"As you can see, I have pretty much converted the
entire truck over to AMSOIL products," Deschner
said.
Preferred
Customer Sold on AMSOIL Quality
Peter Virgona of Merrick, N.Y. is a self-proclaimed
oil enthusiast.
“I do a great deal of reading and research, always
looking for the best
oil,” Virgona said. “The more I read the more I
realized AMSOIL was the
best ‘true’ synthetic I could buy. After using Mobil
1 since 1986, I made
the switch to AMSOIL.”
Virgona is a warehouse worker, but he has many years
of experience working
on cars.
He drives a 1999 Ford Crown Victoria that has nearly
98,000 miles on the
engine. He switched from Mobil 1 to
AMSOIL 5W-30
Synthetic Motor Oil (ASL).
“The difference was immediate and significant,”
Virgona said. “The idle
became much smoother. There are times I can’t tell
if the car is running.
It also became much more responsive to the gas
pedal, so much more
responsive my wife asked me what I did to the car.”
Virgona has owned the car for almost nine years.
“Not surprisingly, the gas
mileage improved significantly,” he said. “This car
always averaged 15
miles per gallon going back and forth from work. It
now averages 16.5 mpg.
That’s a 10 percent increase. I truly didn’t expect
such a big change.”
He waited to report his findings until after he had
driven the car at least
5,000 miles “to confirm that the numbers are average
and not just a fluke.”
Virgona also has installed Ea Air and
Oil Filters in
his vehicles.
He told his sister-in-law about AMSOIL and then
changed her oil over to
AMSOIL 5W-30. She drives a 1996 Dodge Caravan with a
3.0 litre V6 engine.
According to Virgona, she had always used
conventional motor oil with
regular oil changes every 3,000 miles.
“Nonetheless, she had a significant amount of sludge
that was obvious under
the oil fill cap,” he said. “She also experienced a
very loud lifter noise
that would come and go. Presumably, the sludge was
affecting the oil
circulation to the lifters.”
Oil consumption in the van was also increasing,
using about one quart every
1,500 to 2,000 miles.
“I switched the van to AMSOIL and put in a new
filter,” Virgona said.
“Within 1,000 miles the lifter noise was all but
gone. By 3,000 miles,
virtually all the sludge was gone. I drained and
refilled the oil a second
time with AMSOIL 5W-30. The oil consumption is now
down to one quart every
3,000 miles, with no more lifter noise.
“I am very happy with AMSOIL and plan to use it from
now on. I recommend it
to anyone who wants a great synthetic oil.”
Virgona buys his products through the AMSOIL
website. “I always get my
product within 48 hours,” he said. In fact, he just
had a case shipped to
his father in-law in Florida because he believes in
AMSOIL products and
wants others to experience their benefits. In fact,
he’s considering
becoming a Dealer.
Virgona respects that he can get detailed technical
information about
AMSOIL just by checking the website. “AMSOIL puts
out performance test
results for everyone to see. I definitely appreciate
that.
“People are usually very, very loyal to AMSOIL. They
know it’s the best.”
AMSOIL Gives
Life to a Sweet Old Cadillac. Making a skeptic into a believer again.
Dear AMSOIL,
I thought you
might appreciate hearing my AMSOIL story. When the opportunity arose
last year to purchase my mother-in-law's 1987 Cadillac DeVille, I jumped
at the chance. A true low mileage survivor, it was in near pristine
condition. I was proudly showing it off to a mechanic friend when he
said, "Uh-oh, you bought an HT-4100? Good luck buddy."
After much research I understood what he meant. The HT-4100 was rumored
to be one of the most troublesome engines Cadillac ever built. The
problems are numerous: an aluminum block with cast iron heads that
expand and contract at different rates causing premature head and intake
gasket failure, coolant loss into the oil, and finally main and rod
bearing failure. They also have a heavily loaded distributor gear, weak
timing gears, and sludging issues.
My first thought was, if ever an engine needed AMSOIL, it's this one. I
first heard about AMSOIL at the old Brohman Dragway in the late 1970s
from a fellow racer who swore by it. For the past 10 years, I've used
various synthetic oils with favorable results, but never AMSOIL. Then I
talked with Dave Mann, the AMSOIL Dealer in my home town, and told him
my story. Having spent 19 years as a lubrication specialist with Ford,
Dave knows his stuff. He made several recommendations, and shared with
me his excellent e-book on motor oils.
I also asked around at the Cadillac owners group I belong to, and almost
every one of them said, "Don't buy AMSOIL! It's too expensive and won't
do you any good. You need this or that oil with this or that additive,"
and so on. So who was I to believe?
Having spent over 25 years in advertising and marketing, I have a strong
skepticism for extravagant claims made by manufacturers. Usually, when
you hear impressive adjectives like "advanced" and "superior," someone
just wants your money or your vote (or both). So I read the science;
from AMSOIL and from several independent studies. I came to the
conclusion that it really is an excellent product. It also intrigued me
that one of the primary sales points made by AMSOIL is to convince you
to buy LESS of their product. That kind of marketing is contrary to
anything I've experienced, and elevates AMSOIL's credibility level
exponentially.
I switched the Cadillac over to AMSOIL 5W-30 (ASL) last fall, then put
in AMSOIL 10W-30 (ATM) this spring (even though it's not a turbo, I like
the extra wear protection offered by this formula). Rather than letting
the oil go a full year, I change it every six months, during which time
it accumulates about 6,000 miles. My dad was an auto mechanic and taught
the 3,000-mile oil change rule like it was the 11th commandment - that
kind of conditioning is hard to overcome. With this frequency, I still
spend less money than if I changed the oil on a three-month/3,000-mile
schedule. I use the money I save to have drain samples tested by an
independent lab each time.
The Deville now has 50,000 miles and runs like a fine Swiss watch. I
have not had a single problem with the 'troublesome' HT-4100 engine. It
runs roughly 10 degrees cooler than with regular oil, and my gas mileage
has increased by 10%. It has become my mission to get 200,000 miles from
this car. With AMSOIL, I might just make it.
As an addendum, I also recently switched my wife's 2003 Oldsmobile
Silhouette minivan to AMSOIL. Since we've owned it, this car has had a
lifter clatter for the first 10 seconds on cold starts. Literally, on
the first start after putting in AMSOIL, the clatter was gone.
Thanks AMSOIL. By making a superb product that truly does what you say
it will do, you've given new life to a sweet old Cadillac, and made a
believer out of this devout skeptic. (see
photos of car and engine)
Steve Cook
Traverse City, Michigan
HDT Sets AMA Land Speed Record
with AMSOIL
Hayes Diversified Technologies (HDT), located in
Hesperia, California, produces diesel powered tactical military
motorcycles for the U.S. armed services as well as the UK and EU NATO
countries. Founded in 1961, the company originally manufactured
electro-mechanical switches and relays to the military & aerospace
industries.
The new HDT motorcycles are diesel machines combining both power and
environmentally friendly performance efficiency. We are talking about a
bike that gets 100 miles to the gallon AND can do 100 mph.
The HDT team was out on the Bonneville Salt Flats
earlier this month, striving to establish new national and world
records. Displaying the AMSOIL colors while going through the paces at
Bonneville, they offered up quite a number of very strong endorsements
with virtually no prompting. We noticed an increase in horsepower right
away when compared to Delvac 1,¯ said Fred Hayes, founder/CEO of HDT.
What was quite surprising was the condition of the engine after a
50-mile run-in and over 120 full-throttle dyno runs. The camshaft
bearings, the small and large end rod bearings, didn't even look like
they had been run. During that series of dyno runs, we registered the
highest horse-power and torque readings ever.¯
Dave Anderson, AMSOIL Technical Product Manager, had flown to Bonneville
to witness and participate in the pursuit of new land speed records.
Hayes said to Anderson, "Our testing proved that AMSOIL Series 3000
5W-30 Heavy Duty Diesel Oil provided better cam bearing lubrication,
better transmission operation and less blow-by than our previous oil. We
picked up just over one horse power at the rear well." This is a 3.7%
increase and worth a 1 tooth higher gear ratio. In addition, it appears
that overall coolant temperature was down about five degrees. That is
roughly a 2.5% decrease in operating temperatures.
Very few bikers would be opposed to increased horsepower with lower
operating temps, simply by switching over the lubricants.
With over a year of testing, we have found that AMSOIL products
continually outperform all other lubricants. AMSOIL provides improved
performance, increased fuel economy, lower oil consumption, and
significantly reduced engine wear in all operating conditions.
AMSOIL Boosts Bottom Line for
Grain Hauler
Burnell Keller of Castroville, Texas hauls a lot of
corn. Saving downtime and maintenance costs boost
his bottom line.
Since the 1960s, Keller Grain, Inc., at Castroville
has bought high quality white and yellow corn from
local farmers and trucked it to processing plants
across the state of Texas. "These trucks put on
about 12,000 miles a month," said Keller, the
company's owner.
He was running Exxon XD3-30 motor oil in his
Freightliner and changing it every 10,000 miles. He
heard AMSOIL products could cut his operating and
maintenance costs in half, provide better fuel
economy, easier starts and extended oil drains at
least three times longer than he was getting.
"We were fixing to extend the drain to 15,000
miles," Keller said. "But a sample of the Exxon
motor oil analyzed at 10,000 miles came back saying
the oil needed to be changed. I said, let's give
AMSOIL a whirl."
After an engine flush, Keller installed
AMSOIL
15W-40 Heavy Duty Diesel and Marine Oil in his
Freightliner, with more than 400,000 miles on the
engine.
"We did this procedure three times at a 15,000-mile
analysis and filter change only," Keller said. "Each
time the oil sample report came back saying the oil
was good for continued use."
After the third round of analysis, the oil was
changed. Keller plans to continue with 15,000-mile
analysis and filter changes and to continue to use
the same oil for an interval of 50,000 miles.
"That's about five times longer than before," Keller
said. "It's very good. Keller Grain is now convinced
that AMSOIL is a superior product and that anybody
can save money using AMSOIL products."
New Life for Dodge Ram
Preferred Customer Lyle Reinier from Mesa, Ariz. has
been using AMSOIL products for four years with complete satisfaction. He
said that when he started using them in his 2001 Dodge Ram they “changed
the way it ran.”
Now Reinier drives a 2004 Dodge Ram. He uses AMSOIL Synthetic 5W-30 in
the engine, AMSOIL Synthetic Universal Automatic Transmission Fluid
in
the transmission and 80W-140 Long Life Gear Lube.
“AMSOIL has given this truck life that it was hiding before,” said
Reinier. Reinier said the Ram now pulls stronger and runs smoother than
it did before. He made the switch to AMSOIL when the truck hit the
3,000-mile mark. “What comes as a surprise to me is that my Dodge dealer
had no problem doing a complete drain and fill with AMSOIL,” said
Reinier.
Reinier said the dealer removed all the Dodge transmission fluid and
refilled the truck with AMSOIL ATF. “Within a mile or two I could feel
the transmission was smoother and showed a difference in how it
performed,” said Reinier.
Reinier also uses AMSOIL in his dirt bikes. He and his wife have been
using AMSOIL 0W-40 Formula 4-Stroke since it was introduced. Within the
last year, Reinier performed a big bore and a valve job on their bikes
in search of more power.
“The insides of the cases, transmission gears and crank shafts were all
like brand-new,” said Reinier.
Reinier said the cylinder walls of each bike still
showed some cross hatching from the original bore. He also said the
bikes run quieter, smoother and cooler than they did before the switch
to AMSOIL. Both bikes have their original clutches and have logged over
4,000 trail miles.
Customer
Discovers a Burning Desire For AMSOIL
Dealer Mark Licht of Andover, N.J., was on a follow-up visit at Jimmy's
Service, Inc., of Hackettstown, N.J., when the integrity of AMSOIL ATF
was put to a new, on-the-spot test.
Licht showed shop owner Jimmy Naranjo several pieces of literature on
oil and ATF testing results. After listening to Licht talk about the
benefits of AMSOIL ATF, Naranjo turned to him and said, "You're full of
it."
Licht continued to explain all the features and benefits that
AMSOIL ATF
has to offer, but Naranjo interrupted and told him, "There is only one
way to prove this ATF is any good."
Naranjo went to his shelf and opened two brands of transmission fluid he
uses and poured some of each onto his metal workbench. The shop owner
than poured some AMSOIL ATF next to the other two brands. "I had no idea
what this guy was about to do," said Licht.
Naranjo then took out his torch and put the flame directly on the first
brand of transmission fluid he commonly used. After about 30 seconds the
little puddle of transmission fluid started smoking. Naranjo proceeded
to the second brand he stocked in his service shop and repeated the
process. After another 30 seconds, that brand of transmission fluid
began smoking badly.
"Now it's AMSOIL's turn and I must admit I thought my fluid was going to
smoke out just like the others with that direct flame," said Licht.
Naranjo held the flame on the AMSOIL ATF for over two and a half minutes
and there was absolutely no smoke.
"He quickly turned to me and said he'd take a 30-gallon and a 55-gallon
drum of the ATF," said Licht. "We couldn't believe our eyes!"
Now Jimmy's Service stocks the entire XL line of oils, all of the AMSOIL
25,000-mile oils, AMSOIL diesel oils and all of the AMSOIL diesel
additives. The shop also carries AMSOIL filters, 2-cycle oils, Power
Foam Engine Cleaner and Home Heating Fuel Extender.
CROSS COUNTRY TRIP PROVES AMSOIL PERFORMS
Owners of motorhomes, who often travel long distances, are particularly
concerned with finding ways to save on fuel costs.
A Texas man discovered AMSOIL motor oils and lubricants lived up to all
of his expectations in a journey from Texas to Alaska and back in 2004.
"I have a 1998 Dutch Star by Newmar 38-foot motorhome with a 300 horse
power Cat engine," said Shelby Rash, Richardson, Texas. "I also tow a
car behind." Throughout 2003,
Rash averaged 7.1 miles per gallon.
"I use AMSOIL products and believe in them," Rash said.
He took AMSOIL 15W-40 Heavy Duty Diesel and Marine Oil,
an AMSOIL oil
filter, Torque-Drive Synthetic Automatic Transmission Fluid,
AMSOIL
75W-90 Synthetic Gear Lube, AMSOIL Universal Automatic Transmission
Fluid, for power steering/hydraulics, and the AMSOIL Synthetic
Multi-Purpose Grease to a shop in Dallas in January 2004.
"They installed AMSOIL in everything, including the grease fittings,"
Rash said. "I installed a new AMSOIL air filter and oiled the front wet
axles myself. I filled up with diesel and added AMSOIL Cetane Boost and
Diesel Fuel Additive to the tank, as well."
Then Rash took his four-month, 11,000-mile trip.
"I used the two additives each time I filled," he said. "I also attended
two RV rallies where I 'dry-camped with a generator' for a total of 10
days during this time." The only thing he did was change the oil filter
during that time.
"I averaged 8.6 mpg since January 2004 for these 11,000 miles," Rash
said. "This sure helped with the high fuel prices. Just by changing to
AMSOIL I averaged 1.5 mpg better.
"Is AMSOIL worth a try? I think so."
|