|
AMSOIL
Synthetic Two-Cycle Oils Provide Maximum Performance and Protection.
AMSOIL
is the official oil of the Amercian Motorcycle
Association, the World Powersports
Association (WPSA)and the AMA/Chevy Trucks Motocross Series
|

The Official Two-Cycle Oil of the
WPSA Snocross World Wide Championships
|
|
|
AMSOIL lubricated
motorcycles, snowmobiles
and watercraft dominate racing circuits everywhere.
And, just like
in professional
auto racing, most of the other factory race teams are not
using their own manufacturer branded two-cycle oils;
they are using AMSOIL Dominator Synthetic 2-Cycle
Racing Oil! Whether your racing or trail
riding, AMSOIL
has you
covered.
Mike Larocco and
Kevin Windham - Team
AMSOIL/Chaparral/Honda
Sponsored Racers
AMSOIL Dominator Synthetic 2-Cycle Racing Oil
True
Performance Only Comes From Experience
|
DOMINATOR Synthetic 2-Cycle Racing Oil
|
|
|
|
New
AMSOIL DOMINATOR Synthetic 2-Cycle
Racing Oil is a robust formulation
specially engineered for unsurpassed
protection in high performance
two-cycle motors, both on and off
the track. It contains heavier
synthetic base oils that provide
more lubricity for "on the edge"
operation. DOMINATOR reduces
friction and protects pistons and
bearings subjected to the rigors of
racing. DOMINATOR contains the right
additives for clean motor operation.
- Provides
excellent film strength for high
heat, high RPM motors
- Reduces
friction for maximum power
-
Recommended for use with coated
or non-coated racing pistons
-
Recommended for use with exhaust
power valves
-
Recommended for use with high
octane racing gas
- Burns
clean; Prevents ring sticking
and plug fouling
- Provides
excellent protection at 50:1
pre-mix or in injection system
|
|
See Related Article:
Two-cycle
Engine Applications and Lubrication Needs
|
DOMINATOR, an
AMSOIL exclusive formulation,
lubricates and protects high
performance two-cycle motors,
both on and off the track. High
performance motors, particularly
those that are modified, operate
hotter and at higher RPMs than
recreational motors, and they
need good oil for peak
performance. DOMINATOR is
engineered for racing. It has
the right film strength and
clean burning properties for "on
the edge" operation.
Super Film
Strength
High performance two-cycle
motors have high compression
ratios, which significantly
increase combustion chamber heat
and crankshaft bearing
pressures. Hot combustion
processes quickly burn off and
evaporate light oils and cause
rapid piston expansion,
decreasing piston-to-cylinder
wall clearances. This promotes
piston scuffing and possible
seizure. And increased pressure
on crankshaft bearings promotes
metal-to-metal contact, wear and
pitting.
High heat and
pressures require tough oil with
better film strength and more
lubricity. DOMINATOR,
constructed with AMSOIL heavy
synthetic oil, handles high heat
better than mineral oils and
provides improved film strength
and lubricity. DOMINATOR reduces
friction and provides an extra
measure of protection against
piston scuffing and crankshaft
bearing wear.
Clean
Burning
High combustion processes
require the proper additives and
oils to control deposits.
DOMINATOR contains strong, high
temperature detergent additives
and highly pure AMSOIL synthetic
oil. It prevents deposits that
cause ring sticking, plug
fouling and exhaust port
blocking. DOMINATOR is an
optimized product for severe
service.
Applications
DOMINATOR is recommended for use
in high performance stock or
modified two-cycle motors,
including air or liquid cooled
snowmobiles, personal
watercraft, motorcycles (Moto
X), ATVs, go-carts and outboard
motors*. Good for use with
coated or non-coated pistons,
high-octane racing fuels and
exhaust power valves. Compatible
with most other two-cycle oils,
however, mixing oils should be
minimized.
Use at 50:1
pre-mix ratios (2.6 oz. oil per
U.S. gallon of gas) or as
injection oil where JASO FC or
API TC oils are specified. Not
suitable for use with alcohol or
nitro-methane fuels.
* Not suitable
for long-term use in outboard
motors as a TC-W3 type oil,
although excellent as a race oil
for short-term use where motors
are periodically inspected. |
|
TYPICAL
TECHNICAL PROPERTIES
DOMINATOR Synthetic 2-Cycle
Racing Oil
|
|
Kinematic Viscosity @ 100°C, cSt
(ASTM D-445) |
7.6 |
|
Kinematic Viscosity @ 40°C, cSt
(ASTM D-445) |
40.9 |
| Viscosity Index
(ASTM D-2270) |
156 |
|
Pour
Point °C (°F) (ASTM D 97) |
-48 (-54) |
|
Flash
Point °C (°F) (ASTM D 92)
|
92
(198) |
| Fire Point °C
(°F) (ASTM D 92) |
97
(207) |
|
DANGER:
harmful or fatal if swallowed.
Contains synthetic lubricant and
petroleum distillates. If swallowed
do not induce vomiting. Contact a
physician immediately. Keep away
from fire, heat and open flame. Use
with adequate ventilation. Avoid
frequent or prolonged skin contact.
Flush eyes with water for 15 minutes
in case of contact.
KEEP OUT OF
REACH OF CHILDREN. |
|
AMSOIL Powersports Portal
AMSOIL
Interceptor High Performance
Synthetic 2-Cycle Oil
|
|
- Eliminates hard carbon
deposits in ring grooves, piston skirts
and exhaust power valves.
- Extends engine life by
reducing wear on cylinders, pistons and
bearings.
- Reduces smoke and odor
with two-cycle engines
- Prevents plug fouling.
- Provides exceptional
SAE #4 cold temperature fluidity (-54°)
pour point).
- Protects against rust.
- Prevents
pre-detonation by eliminating "hot
spots."
-
Recommended
for Applications Requiring the Following
Specifications: API
TC, JASO
FC
|
PRODUCT
DESCRIPTION
AMSOIL INTERCEPTOR
Synthetic 2-Cycle Oil is formulated with a proprietary
blend of the finest synthetic base oils and additives
available today. This unique AMSOIL chemistry
represents a breakthrough development in the field of
two-cycle engine lubrication.
The backbone of AMSOIL
INTERCEPTOR 2-Cycle Oil is a specially developed
molecularly saturated synthetic base oil. This,
combined with a "double treat" additive
package, ensures exceptional lubricity, cleanliness
and optimum clean-burning characteristics. Extensive
research and testing, including a full snowmobiling
season in severe Rocky Mountain applications, has
proven that wear on cylinders, pistons and bearings is
dramatically reduced. And with up to 30 percent more
detergency and dispersancy than typical two-cycle
oils, AMSOIL INTERCEPTOR virtually eliminates damaging
deposits on piston skirts, ring grooves and exhaust
power valves.
APPLICATIONS
AMSOIL INTERCEPTOR
Synthetic 2-Cycle Oil is recommended as an injector
oil or at a 50:1 mix ratio in carbureted, electronic
fuel Injected (EFI) and direct fuel injected (OFI)
snowmobiles, personal watercraft, motorcycles, ATVs
and jet boats, including, but not limited to, those
manufactured by Bombardier®, Yamaha®, Arctic Cat®,
Polaris®, Kawasaki®, Suzuki® and Honda®.
It is recommended wherever API TC and JASO FC two-cycle oils are
specified. INTERCEPTOR is compatible with and
recommended as a replacement for all mineral and
synthetic manufacturer branded two-cycle oils. For top
performance, mixing is not recommended.
400,000 Miles of
Severe Snowmobile Field testing With No Deposit
Buildup, Power Valve Sticking, Ring Sticking or Engine
Failures.
Subjected to adverse field testing
conditions in the Rocky Mountains, including long
trail rides, high RPM powder riding and steep hill
climbs, AMSOIL INTERCEPTOR demonstrated superior wear
protection and outstanding deposit control.
|
|
| No carbon
deposits are detectable in the functioning
region of the exhaust power valves, resulting
in "no stick" performance,
continuous valve operation and reduced
maintenance. |
 |
 |
| Pistons show no scoring,
little or no wear and no heavy deposits, and
wrist pins show no discoloration from heat. In
fact, the original machine markings on the
pistons are still visible. |
Cylinder head is clean with
no deposits, preventing pre-ignition problems. |
|
TYPICAL TECHNICAL
PROPERTIES
Interceptor Synthetic 2-Cycle Oil
|
|
Kinematic
Viscosity @ 100°C, cSt (ASTM D-445)
|
7.6 |
|
Kinematic
Viscosity @ 40°C, cSt (ASTM D-445)
|
38 |
| Viscosity Index (ASTM
D-2270) |
173 |
|
Pour Point °C
(°F) (ASTM D 97)
|
-48 (-54) |
|
Flash Point
°C (°F) (ASTM D 92)
|
80 (176) |
| Fire Point °C (°F) (ASTM
D 92) |
80 (176) |
| ASTM Brookfield Viscosity @
40°C (°F) |
12400 cP |
|
SAE
Fluidity/Miscibility
|
#4 |
Two Cycle Oil Recommendations Chart
|
HP
Injector Synthetic 2-Cycle Oil |
|
|
|
New
AMSOIL HP Injector Synthetic 2-Cycle Oil
is a precise synthetic formulation that
exceeds the lubrication demands of
modern two-cycle engines. It contains
premium synthetic base oils and MAX-DOSE
additive system, providing superior
performance in direct fuel injected (DFI),
electronic fuel injected (EFI) and
carbureted outboard motors, as well as
other recreational two-cycle equipment.
- Superior
performance in DFI outboard motors
- Prevents
piston and combustion chamber
deposits
- Prevents "ring
jacking" common to DFI outboards
- Low smoke, low
odor product
- Contains up to
30 percent more additives for "super
clean" operation
- Prevents wear
for long engine life
- Prevents rust
-
Multi-functional and recommended for
use in many two-cycle motors
- Low aquatic
toxicity
- Recommended
for use as injection oil or at a
50:1 pre-mix
See Article:
Two-Cycle Engine Applications and
Lubrication Needs |
|
|
AMSOIL 2-Cycle Oil
Lineup
"The Fabulous Four"
|
|
|
|
HP Injector is a
precise synthetic formulation that
exceeds the lubrication demands of
modern two-cycle motors. Today's
two-cycle outboard motors operate at
higher temperatures and at leaner oil
and fuel ratios than older motors. This
difficult operating environment requires
proper lubrication technology to keep
motors running long and strong. HP
Injector is a premium lubricant
engineered with AMSOIL synthetic base
oils and MAXDOSE advanced
additives. It contains up to 30
percent more additives than other TC-W3
two-cycle oils for "super clean"
operation. And because AMSOIL synthetic
oils are more durable, they are perfect
for lean mixture operations. In
addition, this AMSOIL exclusive product
produces low smoke and odor and has low
aquatic toxicity properties, making it
ideal for boats.
HP Injector improves
engine life. It prevents deposits that
cause ring sticking and ring jacking
(carbon build-up behind the ring,
forcing it outward), a phenomenon that
occurs in modern DFI outboard motors. HP
Injector prevents wear. It has excellent
lubricity properties and provides a good
lubricating oil film, protecting pistons
and bearings. HP Injector prevents rust,
an important feature where motors are
subjected to water. HP Injector provides
superior performance in direct fuel
injected (DFI), electronic fuel injected
(EFI) and carbureted outboard motors, as
well as other recreational equipment.
Applications
HP Injector is recommended for use in
all two-cycle outboard motors including,
but not limited to, Mercury® EFI &
Optimax®, Johnson® and Evinrude® FICHT®
and E-TEC™, Yamaha® HPDI, Nissan® and
Tohatsu® TLDI®, Suzuki®, Mariner® and
Force®. Also recommended for use in
all two-cycle personal watercraft and
jet boats, as well as snowmobiles,
motorcycles and ATVs.
Use as injection oil
or as 50:1 pre-mix (2.6 oz. per U.S.
gallon of gas) where NMMA TC-W3 or
API TC oils are specified.
Compatible with mineral and synthetic
TC-W3 type two-cycle oils, however,
mixing two-cycle oils should be
minimized. |
|
TYPICAL TECHNICAL
PROPERTIES
HP Injector Synthetic 2-Cycle Oil
|
|
Kinematic
Viscosity @ 100°C, cSt (ASTM D-445) |
7.3 |
|
Kinematic
Viscosity @ 40°C, cSt (ASTM D-445) |
35.9 |
| Viscosity Index (ASTM
D-2270) |
171 |
|
Pour
Point °C (°F) (ASTM D 97) |
-46
(-51) |
|
Flash
Point °C (°F) (ASTM D 92) |
82
(180) |
| Fire Point °C (°F)
(ASTM D 92) |
82
(180) |
|
DANGER:
harmful or fatal if swallowed. Contains
synthetic lubricant and petroleum
distillates. If swallowed do not induce
vomiting. Contact a physician
immediately. Keep away from fire, heat
and open flame. Use with adequate
ventilation. Avoid frequent or prolonged
skin contact. Flush eyes with water for
15 minutes in case of contact.
KEEP OUT OF
REACH OF CHILDREN. |
|
|
Saber Synthetic 100:1 Pre-Mix 2-Cycle Oils |
|
|
|
New
AMSOIL Saber Professional (ATP) and
Saber Outboard (ATO) Synthetic
2-Cycle Oils are specifically
designed for lean mix ratios in
pre-mix applications. Saber
Professional contains high
temperature detergents for small
power equipment. Saber Outboard
contains lower temperature
dispersants for water-cooled
outboard motors. Extensive testing
shows superior lubricity and
cleanliness properties at lean mix
ratios of these premium synthetic
formulations.
- Saber
Professional is "Smokeless"
- Saber
Outboard is a very low smoke,
low odor product
- At 100:1,
both oils produce 30 percent
lower emissions than oils mixed
at 50:1
- Saber
Professional is recommended for
ISO-L-EGD applications
- One mix
ratio for everything eliminates
confusion
- Both oils
are versatile and very good for
many applications
- Cost
effective compared to oils mixed
at 50:1 or richer
- Saber
Outboard exhibits low aquatic
toxicity
- Lean mix
ratio prevents plug fouling and
exhaust port deposits
|
|
|
|
|
Product
Description
AMSOIL Saber Professional (ATP) and
Outboard (ATO) Synthetic 100:1
Pre-Mix 2-Cycle Oils are formulated
with exclusive AMSOIL synthetic base
oils and premium additives. Designed
for lean mix ratios in two-cycle
motors, Saber 2-Cycle Oils have
excellent lubricity and cleanliness
properties, controlling friction and
preventing wear, plug fouling, ring
sticking and exhaust port blocking.
AMSOIL Synthetic 100:1 2-Cycle Oils
have been protecting and providing
improved performance in two-cycle
motors since 1973.
Saber
Professional
Saber Professional (ATP) is
specifically designed for small
engines including, but not limited
to, chain saws, lawn equipment,
blowers, chop saws, pumps, scooters
and go-carts. It is also very good
for use in motorcycles, snowmobiles,
ATVs, jet boats and personal
watercraft. Saber Professional is
formulated with high temperature
detergent additives that prevent
hard carbon deposits from forming in
these hot operating motors. Saber
Professional is “smokeless” and
delivers as much as 30 percent fewer
emissions at 100:1 mix ratios than
oils mixed at 50:1. Equipment
operators subjected to smoke and
fumes will benefit from these low
emission properties. Because one mix
ratio satisfies multiple pieces of
equipment, Saber Professional
eliminates mix ratio confusion.
Saber Professional is recommended
for pre-mix where ISO-L-EGD, JASO FC
or API TC is specified.
Saber Outboard
Saber Outboard (ATO) is specifically
designed for outboard motors. It is
also very good for personal
watercraft, jet boats, motorcycles,
snowmobiles and ATVs. Saber Outboard
contains a heavy dose of lower
temperature dispersant additives
that excel at preventing varnish and
deposits from forming in
water-cooled motors. Saber Outboard
is a very low smoke, low odor, low
toxicity product that produces as
much as 30 percent fewer emissions
at 100:1 mix ratios than oils mixed
at 50:1. It is ideal for trolling
motors as it prevents “oil loading”
and plug fouling for rapid throttle
response. Operators and the
environment benefit from the use of
Saber Outboard. It is recommended
for pre-mix use where TC-W3 or API
TC is specified.
Applications
AMSOIL Saber 100:1 2-Cycle Oils are
recommended for 100:1 mix ratios in
normal service and 50:1 to 80:1 mix
ratios in severe service
applications such as commercial
equipment operations and racing. |
|
TYPICAL
TECHNICAL PROPERTIES
Saber Synthetic 100:1 Pre-Mix
2-Cycle Oils
|
| |
ATP |
ATO |
|
Kinematic Viscosity @ 100°C, cSt
(ASTM D-445) |
11.9 |
13.4 |
|
Kinematic Viscosity @ 40°C, cSt
(ASTM D-445) |
78.2 |
91.3 |
| Viscosity Index
(ASTM D-2270) |
145 |
148 |
|
Pour
Point °C (°F) (ASTM D 97) |
-38 (-36) |
-36 (-33) |
|
Flash
Point °C (°F) (ASTM D 92)
|
101 (214) |
102 (216) |
| Fire Point °C
(°F) (ASTM D 92) |
107 (225) |
106 (223) |
|
DANGER:
harmful or fatal if swallowed.
Contains synthetic lubricant and
petroleum distillates. If swallowed
do not induce vomiting. Contact a
physician immediately. Keep away
from fire, heat and open flame. Use
with adequate ventilation. Avoid
frequent or prolonged skin contact.
Flush eyes with water for 15 minutes
in case of contact.
KEEP OUT OF
REACH OF CHILDREN. |
|
If you would
like a FREE comprehensive packet of technical,
information, catalogs, specifications, retail and
wholesale prices, dealer application and other crucial
information regarding AMSOIL Ultra Premium Synthetic
Motor Oils and Filtration Products plus much, much
more please e-mail us at dave@performanceoiltechnology.com
with your postal mailing address and your packet will be
shipped promptly. Your name and address will be held
strictly confidential.
Also, please
inform us of any special interests you have (diesel,
motorcycle, racing, etc.) so that we can include
additional material pertaining to your special
interests and vehicles.
AMSOIL
is the undisputed leader in synthetics.............
AMSOIL
Synthetic Lubricants meet and far exceed ALL
manufacturer and API specifications.
With AMSOIL, you are using a superior product to ANY
manufacturer branded, or any other brand of lubricant.
We have documented and certified independent ASTM
and SAE test data to prove it, along with 35
years of world class performance and hundreds of millions of miles of on-the-road testing.

Since
1972, AMSOIL
Synthetics have proven to be the BEST.
AMSOIL also engineers and manufactures Ea Oil
Filters with Nanofiber Technology which have a 25,000 mile/1-year service life as well as
specialized filtration systems for commercial and fleet
applications in cars and light, medium and heavy trucks which
can filter particles down to less than one micron (a standard
full flow oil filter can only filter to 20-25 microns, and at
a reduced efficiency) making oil changes virtually
unnecessary and virtually eliminating engine wear.
These filters have been proven by millions of miles of
over-the road trucks, construction equipment and fleet
service.
- AMSOIL
saves you time and money.
- The
only 25,000 mile/one- year and 35,000/one- year motor oil
in the world.
- Exceeds
the most stringent performance specifications of all major
U.S. and foreign automotive and truck manufacturers.
- Provides up to five-times the wear protection of other motor oils.
- Increases
the life of your vehicle.
- Improves
performance, fuel economy and efficiency.
- Diesel
oil and filtration products designed to deliver 1,000,000
miles for over-the-road trucks before engine overhaul.
- Used
by many national racing teams, fleets, police departments,
construction firms and trucking companies.
Performance
Oil Technology is a skilled team of Engineers and Lubrication
and Filtration Specialists led by Dave Mann. Mr. Mann is an
AMSOIL Regency Platinum Six Star Direct Jobber, Detroit MI Truck/Automotive Engineer
and Lubrication Specialist with over 23years experience.
Direct Jobber Dave Mann Makes AMSOIL History
You too, can join our group
when you become an
AMSOIL
Dealer or Preferred Customer and take advantage of all that we offer as you
use products in your own vehicles or begin your own AMSOIL
business. Or you can simply purchase AMSOIL products at
wholesale prices with our Preferred Customer option. You won't find a more knowledgeable and skilled
group of Dealers anywhere which is very important when you
need support as use products and/or build your business.
In
addition, as a Dealer in our group you will receive exclusive
unlimited product, technical and business support from the
only group of Truck and Automotive Engineers and Lubrication
Specialists on the net.
We
do not only run our business on the internet. We also have
numerous commercial, industrial, trucking, excavating,
construction, logging, police, racing and many more accounts
that we support and service on a regular basis. We have
several fully stocked warehouses and fully equipped shop
facilities. This provides us with excellent knowledge of the
products, equipment and the business and the ability to respond
immediately to any of your needs. We will use this
knowledge and experience to help you get started so you too
can achieve your goals.
We
possess the skills, desire and knowledge to answer
questions, solve problems, improve efficiency, reduce
downtime, maintenance costs and increase the durability and
life of all of your vehicles. We are based out of
Wolverine Lake/Walled Lake, Mi and Traverse City, MI and do
business nationwide and in Canada.
Read what our
satisfied
customers have to say about us. Read through our
website. Contact us with any questions. If you decide to
become an AMSOIL Dealer you will be joining, in our
opinion, the most skilled AMSOIL group there is. We will help
you get started and provide you with the tools and information
in order to be successful in this business or with
technical and product assistance to use AMSOIL products in
your own vehicles.
If
you would like a FREE comprehensive packet of technical,
information, catalogs, specifications, retail and wholesale
prices, dealer application and other crucial information
regarding AMSOIL Ultra Premium Synthetic Motor Oils and
Filtration Products plus much, much more please e-mail us at dave@performanceoiltechnology.com
with your postal mailing address and your packet will be
shipped promptly. Your name and address will be held strictly
confidential.
Also,
please inform us of any special interests you have (diesel,
motorcycle, racing, etc.) so that we can include additional
material pertaining to your special interests and vehicles.
AMSOIL
is Proudly Made in the U.S.A. AMSOIL
is America's Oil.
|
ASTM Comparative Motor Oil Testing
See Who
Came Out on Top!
AMSOIL 10W-30, Mobil 1 Extended
Performance, Quaker State
Advanced Full Synthetic, Penzoil
Platinum, Trop Arctic,
Motorcraft, Castrol GTX, Chevron
Supreme, Havoline, Formula
Shell, Penzoil
|
|
AMSOIL Dealership and
Preferred Customer Wholesale
Pricing Information
-
Minimal Dealership start-up fee ($15
for 6-months, $30 for 1-year))
-
$10 for 6-months
Preferred Customer Membership
-
Premium Quality Product
Line
-
No inventory requirements
or territory restrictions
-
No capital investment
-
No employee expenses or
requirements
-
You choose your level of
time investment
-
Excellent tax benefits
-
Exclusive Dealership Internet Promotional
Package to help get you started and keep you up to date.
-
Expert assistance from
your sponsor, a Detroit Michigan Lubrication Specialist & Automotive Engineer with
22
years experience.
Use the form below to get complete product/ technical and
Dealership/Preferred Customer information and to find
out how you can get a large discount on all your AMSOIL purchases while
building a stable and solid business.
|
Customer Sold on AMSOIL Quality
and Value.
That's what today's savvy consumers want.
According to marketing analysts, the average
consumer no longer accepts general sales pitches
full of empty promises. The Internet gives consumers
instant access to nearly every possible product or
service. They look for quality information, conduct
price comparisons and then make buying decisions.
The bottom line: more bang for their buck. And when
that consumer is raising seven children, top quality
products and savings are an even greater priority.
Scott Boring, Oakfield, N.Y., has seven children
with his wife Teri. He's looking for quality and
savings to keep his 1997 GMC Yukon, with a 5.7 litre
V-8 engine that "isn't noted for gas mileage,"
running down the road carrying his large family as
efficiently as possible.
A friend told Boring about AMSOIL products. He
promised better gas mileage - an important selling
point with today's high gasoline prices - more
efficient performance and longer life.
The vehicle had 40,000 miles on it when Boring
installed AMSOIL products bumper to bumper.
"I did it all at one time, just to see the
difference," Boring said. He installed
AMSOIL Severe Gear 75W-140 Synthetic Gear Oil, used AMSOIL Engine
Flush and then installed AMSOIL 10W-40 Synthetic
High Performance Motor Oil and AMSOIL Universal
Automatic Transmission Fluid.
"I especially like the ATF," Boring said. "The truck
shifts smoother and the transmission is quiet. All
you hear is the tires on the ground. I've tried
other synthetics, lots of them. I just never saw any
difference. But, with AMSOIL, I saw a difference
right away."
The first tankful of gasoline increased his mileage
from 15 mpg to 20.5 mpg. "I swear I didn't believe
it," he said. "I'm averaging between 19 and 21 mpg
all the time.
"This stuff is awesome and I'm letting all my
friends know about it."
AMSOIL Customers Appreciate Greater MPG
Although results vary because of a variety of factors, a common
denominator among AMSOIL motor oil users is an improvement in fuel
economy.
Independent testing reveals that AMSOIL Signature Series 0W-30 motor oil
passes the API Energy Conservation Sequence VI test with a rating 38
percent higher than the API minimum specifications.
"The test results show that AMSOIL has the potential to save energy by
conserving fuel," said Technical Services Manager Ed Kellerman. "In most
cases it can increase mileage, but at the very least you're getting
superior engine protection."
Ralph Sites, a police officer in Rustburg, VA, said he put AMSOIL 10W-40
Synthetic Motorcycle Oil in his 2002 GL 1800 Honda Gold Wing when it had
4,550 miles on the engine.
"I had been getting 30 miles per gallon," Sites said. "I was supposed to
be getting 40 to 45 miles per gallon."
His first oil change to AMSOIL improved his mileage to 38 miles per
gallon. At 6,500 miles on the engine, after replacing the final drive
oil with AMSOIL Severe Gear 75W-90 Gear Lube, he improved to 40 miles
per gallon.
"I switched to AMSOIL for the long-term gain. The improved gas mileage
was just a bonus. AMSOIL is less expensive than Honda's synthetic and I
don't have to change it as often. It's a win-win situation."
He bought the bike new in January 2002 and had put 12,000 miles on it in
August. He said the improved mileage he's gotten since switching to
AMSOIL has saved him $102 just in gasoline.
Jeff Bailey in Fulton, Mo., said his 1996 Lexus GS300 with 81,000
miles on it also gained fuel efficiency when he switched to AMSOIL
motor oil.
"The car wants premium gasoline," he said. "I drive about 18,000 miles a
year. I ordered your synthetic product and absolutely astounded.
"I was used to getting about 20 mpg overall and having a little low-rev
torque."
Since switching to AMSOIL motor oil, Bailey gets 24 mpg and uses regular
gasoline.
"The engine feels even more flexible," he said. "I've used AMSOIL now
for my wife's anemic Camry 2.2 litre and have calculated that I have
saved about $120," he said. "Thanks AMSOIL for an awesome product. You
have a customer for life."
Likewise, Lance Okeson of St. Paul, Minn., gained miles per gallon after
switching to AMSOIL motor oil in his 1995 Cutlass Supreme.
Okeson made the switch after learning about AMSOIL from a customer of
his at a quick lube where he works. His customer was so enthusiastic
about AMSOIL, Okeson did some research on the AMSOIL Website and decided
to try the products. A trip from the Twin Cities to Fargo, N.D., in a
steady 17 mile-per-hour wind, and back showed him an increase from 24
mpg to 30.5 mpg.
"I have never gotten 30 plus mpg with that car," Okeson said. "I have
two other vehicles that I switched over to AMSOIL motor oil. One is a
4x4 and the other is an old muscle car. I switched the transmissions and
the differentials in those vehicles as well."
ASE Master Technician Sold on
AMSOIL
Mark Deschner, Friendswood, Texas,
is an ASE Master Technician and Manager of the West
Pear Land Tire & Auto Store.
He recently was able to demonstrate the superior
quality of AMSOIL Synthetic Lubricants when he had
to change out a leaking intake manifold on his 1991
Chevrolet 1/2 ton pickup truck, with more than
183,000 miles on the original engine.
"When my lead technician took the intake manifold
off, for the first time ever, he couldn't believe
how clean the lifter valley and the top of the
cylinder heads were on my truck," Deschner said.
The technician thought Deschner may have changed it
before. But Deschner assured him he had never had
the intake off before.
"He always made fun of me for only changing the oil
once a year and the filter twice a year," Deschner
said. "I think that seeing how clean the intake and
cylinder heads are in my truck has changed his mind
about AMSOIL products. I've always believed in them
and my truck runs AMSOIL for all lubricant needs."
He uses AMSOIL 10W-40 Synthetic Motor Oil,
EAO24
Absolute Efficiency Oil Filter, TS31 2-Stage Air Filter,
GF111 Fuel Filter, 80W-90 Synthetic Gear Lube,
Universal Automatic Transmission Fluid, Synthetic
Multi-purpose Grease, P.I. Performance Gas Additive,
Rain Clear Windshield Protectant and Bosch
windshield wiper blades.
"As you can see, I have pretty much converted the
entire truck over to AMSOIL products," Deschner
said.
Preferred
Customer Sold on AMSOIL Quality
Peter Virgona of Merrick, N.Y. is a self-proclaimed
oil enthusiast.
“I do a great deal of reading and research, always
looking for the best
oil,” Virgona said. “The more I read the more I
realized AMSOIL was the
best ‘true’ synthetic I could buy. After using Mobil
1 since 1986, I made
the switch to AMSOIL.”
Virgona is a warehouse worker, but he has many years
of experience working
on cars.
He drives a 1999 Ford Crown Victoria that has nearly
98,000 miles on the
engine. He switched from Mobil 1 to
AMSOIL 5W-30
Synthetic Motor Oil (ASL).
“The difference was immediate and significant,”
Virgona said. “The idle
became much smoother. There are times I can’t tell
if the car is running.
It also became much more responsive to the gas
pedal, so much more
responsive my wife asked me what I did to the car.”
Virgona has owned the car for almost nine years.
“Not surprisingly, the gas
mileage improved significantly,” he said. “This car
always averaged 15
miles per gallon going back and forth from work. It
now averages 16.5 mpg.
That’s a 10 percent increase. I truly didn’t expect
such a big change.”
He waited to report his findings until after he had
driven the car at least
5,000 miles “to confirm that the numbers are average
and not just a fluke.”
Virgona also has installed Ea Air and
Oil Filters in
his vehicles.
He told his sister-in-law about AMSOIL and then
changed her oil over to
AMSOIL 5W-30. She drives a 1996 Dodge Caravan with a
3.0 litre V6 engine.
According to Virgona, she had always used
conventional motor oil with
regular oil changes every 3,000 miles.
“Nonetheless, she had a significant amount of sludge
that was obvious under
the oil fill cap,” he said. “She also experienced a
very loud lifter noise
that would come and go. Presumably, the sludge was
affecting the oil
circulation to the lifters.”
Oil consumption in the van was also increasing,
using about one quart every
1,500 to 2,000 miles.
“I switched the van to AMSOIL and put in a new
filter,” Virgona said.
“Within 1,000 miles the lifter noise was all but
gone. By 3,000 miles,
virtually all the sludge was gone. I drained and
refilled the oil a second
time with AMSOIL 5W-30. The oil consumption is now
down to one quart every
3,000 miles, with no more lifter noise.
“I am very happy with AMSOIL and plan to use it from
now on. I recommend it
to anyone who wants a great synthetic oil.”
Virgona buys his products through the AMSOIL
website. “I always get my
product within 48 hours,” he said. In fact, he just
had a case shipped to
his father in-law in Florida because he believes in
AMSOIL products and
wants others to experience their benefits. In fact,
he’s considering
becoming a Dealer.
Virgona respects that he can get detailed technical
information about
AMSOIL just by checking the website. “AMSOIL puts
out performance test
results for everyone to see. I definitely appreciate
that.
“People are usually very, very loyal to AMSOIL. They
know it’s the best.”
AMSOIL Gives
Life to a Sweet Old Cadillac. Making a skeptic into a believer again.
Dear AMSOIL,
I thought you
might appreciate hearing my AMSOIL story. When the opportunity arose
last year to purchase my mother-in-law's 1987 Cadillac DeVille, I jumped
at the chance. A true low mileage survivor, it was in near pristine
condition. I was proudly showing it off to a mechanic friend when he
said, "Uh-oh, you bought an HT-4100? Good luck buddy."
After much research I understood what he meant. The HT-4100 was rumored
to be one of the most troublesome engines Cadillac ever built. The
problems are numerous: an aluminum block with cast iron heads that
expand and contract at different rates causing premature head and intake
gasket failure, coolant loss into the oil, and finally main and rod
bearing failure. They also have a heavily loaded distributor gear, weak
timing gears, and sludging issues.
My first thought was, if ever an engine needed AMSOIL, it's this one. I
first heard about AMSOIL at the old Brohman Dragway in the late 1970s
from a fellow racer who swore by it. For the past 10 years, I've used
various synthetic oils with favorable results, but never AMSOIL. Then I
talked with Dave Mann, the AMSOIL Dealer in my home town, and told him
my story. Having spent 19 years as a lubrication specialist with Ford,
Dave knows his stuff. He made several recommendations, and shared with
me his excellent e-book on motor oils.
I also asked around at the Cadillac owners group I belong to, and almost
every one of them said, "Don't buy AMSOIL! It's too expensive and won't
do you any good. You need this or that oil with this or that additive,"
and so on. So who was I to believe?
Having spent over 25 years in advertising and marketing, I have a strong
skepticism for extravagant claims made by manufacturers. Usually, when
you hear impressive adjectives like "advanced" and "superior," someone
just wants your money or your vote (or both). So I read the science;
from AMSOIL and from several independent studies. I came to the
conclusion that it really is an excellent product. It also intrigued me
that one of the primary sales points made by AMSOIL is to convince you
to buy LESS of their product. That kind of marketing is contrary to
anything I've experienced, and elevates AMSOIL's credibility level
exponentially.
I switched the Cadillac over to AMSOIL 5W-30 (ASL) last fall, then put
in AMSOIL 10W-30 (ATM) this spring (even though it's not a turbo, I like
the extra wear protection offered by this formula). Rather than letting
the oil go a full year, I change it every six months, during which time
it accumulates about 6,000 miles. My dad was an auto mechanic and taught
the 3,000-mile oil change rule like it was the 11th commandment - that
kind of conditioning is hard to overcome. With this frequency, I still
spend less money than if I changed the oil on a three-month/3,000-mile
schedule. I use the money I save to have drain samples tested by an
independent lab each time.
The Deville now has 50,000 miles and runs like a fine Swiss watch. I
have not had a single problem with the 'troublesome' HT-4100 engine. It
runs roughly 10 degrees cooler than with regular oil, and my gas mileage
has increased by 10%. It has become my mission to get 200,000 miles from
this car. With AMSOIL, I might just make it.
As an addendum, I also recently switched my wife's 2003 Oldsmobile
Silhouette minivan to AMSOIL. Since we've owned it, this car has had a
lifter clatter for the first 10 seconds on cold starts. Literally, on
the first start after putting in AMSOIL, the clatter was gone.
Thanks AMSOIL. By making a superb product that truly does what you say
it will do, you've given new life to a sweet old Cadillac, and made a
believer out of this devout skeptic. (see
photos of car and engine)
Steve Cook
Traverse City, Michigan
HDT Sets AMA Land Speed Record
with AMSOIL
Hayes Diversified Technologies (HDT), located in
Hesperia, California, produces diesel powered tactical military
motorcycles for the U.S. armed services as well as the UK and EU NATO
countries. Founded in 1961, the company originally manufactured
electro-mechanical switches and relays to the military & aerospace
industries.
The new HDT motorcycles are diesel machines combining both power and
environmentally friendly performance efficiency. We are talking about a
bike that gets 100 miles to the gallon AND can do 100 mph.
The HDT team was out on the Bonneville Salt Flats
earlier this month, striving to establish new national and world
records. Displaying the AMSOIL colors while going through the paces at
Bonneville, they offered up quite a number of very strong endorsements
with virtually no prompting. We noticed an increase in horsepower right
away when compared to Delvac 1,ť said Fred Hayes, founder/CEO of HDT.
What was quite surprising was the condition of the engine after a
50-mile run-in and over 120 full-throttle dyno runs. The camshaft
bearings, the small and large end rod bearings, didn't even look like
they had been run. During that series of dyno runs, we registered the
highest horse-power and torque readings ever.ť
Dave Anderson, AMSOIL Technical Product Manager, had flown to Bonneville
to witness and participate in the pursuit of new land speed records.
Hayes said to Anderson, "Our testing proved that AMSOIL Series 3000
5W-30 Heavy Duty Diesel Oil provided better cam bearing lubrication,
better transmission operation and less blow-by than our previous oil. We
picked up just over one horse power at the rear well." This is a 3.7%
increase and worth a 1 tooth higher gear ratio. In addition, it appears
that overall coolant temperature was down about five degrees. That is
roughly a 2.5% decrease in operating temperatures.
Very few bikers would be opposed to increased horsepower with lower
operating temps, simply by switching over the lubricants.
With over a year of testing, we have found that AMSOIL products
continually outperform all other lubricants. AMSOIL provides improved
performance, increased fuel economy, lower oil consumption, and
significantly reduced engine wear in all operating conditions.
AMSOIL Boosts Bottom Line for
Grain Hauler
Burnell Keller of Castroville, Texas hauls a lot of
corn. Saving downtime and maintenance costs boost
his bottom line.
Since the 1960s, Keller Grain, Inc., at Castroville
has bought high quality white and yellow corn from
local farmers and trucked it to processing plants
across the state of Texas. "These trucks put on
about 12,000 miles a month," said Keller, the
company's owner.
He was running Exxon XD3-30 motor oil in his
Freightliner and changing it every 10,000 miles. He
heard AMSOIL products could cut his operating and
maintenance costs in half, provide better fuel
economy, easier starts and extended oil drains at
least three times longer than he was getting.
"We were fixing to extend the drain to 15,000
miles," Keller said. "But a sample of the Exxon
motor oil analyzed at 10,000 miles came back saying
the oil needed to be changed. I said, let's give
AMSOIL a whirl."
After an engine flush, Keller installed
AMSOIL
15W-40 Heavy Duty Diesel and Marine Oil in his
Freightliner, with more than 400,000 miles on the
engine.
"We did this procedure three times at a 15,000-mile
analysis and filter change only," Keller said. "Each
time the oil sample report came back saying the oil
was good for continued use."
After the third round of analysis, the oil was
changed. Keller plans to continue with 15,000-mile
analysis and filter changes and to continue to use
the same oil for an interval of 50,000 miles.
"That's about five times longer than before," Keller
said. "It's very good. Keller Grain is now convinced
that AMSOIL is a superior product and that anybody
can save money using AMSOIL products."
New Life for Dodge Ram
Preferred Customer Lyle Reinier from Mesa, Ariz. has
been using AMSOIL products for four years with complete satisfaction. He
said that when he started using them in his 2001 Dodge Ram they “changed
the way it ran.”
Now Reinier drives a 2004 Dodge Ram. He uses AMSOIL Synthetic 5W-30 in
the engine, AMSOIL Synthetic Universal Automatic Transmission Fluid
in
the transmission and 80W-140 Long Life Gear Lube.
“AMSOIL has given this truck life that it was hiding before,” said
Reinier. Reinier said the Ram now pulls stronger and runs smoother than
it did before. He made the switch to AMSOIL when the truck hit the
3,000-mile mark. “What comes as a surprise to me is that my Dodge dealer
had no problem doing a complete drain and fill with AMSOIL,” said
Reinier.
Reinier said the dealer removed all the Dodge transmission fluid and
refilled the truck with AMSOIL ATF. “Within a mile or two I could feel
the transmission was smoother and showed a difference in how it
performed,” said Reinier.
Reinier also uses AMSOIL in his dirt bikes. He and his wife have been
using AMSOIL 0W-40 Formula 4-Stroke since it was introduced. Within the
last year, Reinier performed a big bore and a valve job on their bikes
in search of more power.
“The insides of the cases, transmission gears and crank shafts were all
like brand-new,” said Reinier.
Reinier said the cylinder walls of each bike still
showed some cross hatching from the original bore. He also said the
bikes run quieter, smoother and cooler than they did before the switch
to AMSOIL. Both bikes have their original clutches and have logged over
4,000 trail miles.
Customer
Discovers a Burning Desire For AMSOIL
Dealer Mark Licht of Andover, N.J., was on a follow-up visit at Jimmy's
Service, Inc., of Hackettstown, N.J., when the integrity of AMSOIL ATF
was put to a new, on-the-spot test.
Licht showed shop owner Jimmy Naranjo several pieces of literature on
oil and ATF testing results. After listening to Licht talk about the
benefits of AMSOIL ATF, Naranjo turned to him and said, "You're full of
it."
Licht continued to explain all the features and benefits that
AMSOIL ATF
has to offer, but Naranjo interrupted and told him, "There is only one
way to prove this ATF is any good."
Naranjo went to his shelf and opened two brands of transmission fluid he
uses and poured some of each onto his metal workbench. The shop owner
than poured some AMSOIL ATF next to the other two brands. "I had no idea
what this guy was about to do," said Licht.
Naranjo then took out his torch and put the flame directly on the first
brand of transmission fluid he commonly used. After about 30 seconds the
little puddle of transmission fluid started smoking. Naranjo proceeded
to the second brand he stocked in his service shop and repeated the
process. After another 30 seconds, that brand of transmission fluid
began smoking badly.
"Now it's AMSOIL's turn and I must admit I thought my fluid was going to
smoke out just like the others with that direct flame," said Licht.
Naranjo held the flame on the AMSOIL ATF for over two and a half minutes
and there was absolutely no smoke.
"He quickly turned to me and said he'd take a 30-gallon and a 55-gallon
drum of the ATF," said Licht. "We couldn't believe our eyes!"
Now Jimmy's Service stocks the entire XL line of oils, all of the AMSOIL
25,000-mile oils, AMSOIL diesel oils and all of the AMSOIL diesel
additives. The shop also carries AMSOIL filters, 2-cycle oils, Power
Foam Engine Cleaner and Home Heating Fuel Extender.
CROSS COUNTRY TRIP PROVES AMSOIL PERFORMS
Owners of motorhomes, who often travel long distances, are particularly
concerned with finding ways to save on fuel costs.
A Texas man discovered AMSOIL motor oils and lubricants lived up to all
of his expectations in a journey from Texas to Alaska and back in 2004.
"I have a 1998 Dutch Star by Newmar 38-foot motorhome with a 300 horse
power Cat engine," said Shelby Rash, Richardson, Texas. "I also tow a
car behind." Throughout 2003,
Rash averaged 7.1 miles per gallon.
"I use AMSOIL products and believe in them," Rash said.
He took AMSOIL 15W-40 Heavy Duty Diesel and Marine Oil,
an AMSOIL oil
filter, Torque-Drive Synthetic Automatic Transmission Fluid,
AMSOIL
75W-90 Synthetic Gear Lube, AMSOIL Universal Automatic Transmission
Fluid, for power steering/hydraulics, and the AMSOIL Synthetic
Multi-Purpose Grease to a shop in Dallas in January 2004.
"They installed AMSOIL in everything, including the grease fittings,"
Rash said. "I installed a new AMSOIL air filter and oiled the front wet
axles myself. I filled up with diesel and added AMSOIL Cetane Boost and
Diesel Fuel Additive to the tank, as well."
Then Rash took his four-month, 11,000-mile trip.
"I used the two additives each time I filled," he said. "I also attended
two RV rallies where I 'dry-camped with a generator' for a total of 10
days during this time." The only thing he did was change the oil filter
during that time.
"I averaged 8.6 mpg since January 2004 for these 11,000 miles," Rash
said. "This sure helped with the high fuel prices. Just by changing to
AMSOIL I averaged 1.5 mpg better.
"Is AMSOIL worth a try? I think so."

|
AMSOIL Dealership and
Preferred Customer Wholesale
Pricing Information
-
Minimal Dealership start-up fee ($15
for 6-months, $30 for 1-year))
-
$10 for 6-months
Preferred Customer Membership
-
Premium Quality Product
Line
-
No inventory requirements
or territory restrictions
-
No capital investment
-
No employee expenses or
requirements
-
You choose your level of
time investment
-
Excellent tax benefits
-
Exclusive Dealership Internet Promotional
Package to help get you started and keep you up to date.
-
Expert assistance from
your sponsor, a Detroit Michigan Lubrication Specialist & Automotive Engineer with
22
years experience.
Use the form below to get complete product/ technical and
Dealership/Preferred Customer information and to find
out how you can get a large discount on all your AMSOIL purchases while
building a stable and solid business.
|
Customer Sold on AMSOIL Quality
and Value.
That's wh |